Print Page | Close Window

1994 Camry wiring harness for factory amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64478
Printed Date: July 12, 2025 at 10:36 AM


Topic: 1994 Camry wiring harness for factory amp

Posted By: jazzy1986
Subject: 1994 Camry wiring harness for factory amp
Date Posted: October 16, 2005 at 1:48 PM

Hi,

I am replacing the factory amp under the passenger seat of my 1994 camry with a rockford fosgate amp.

I need a wiring harness adapter for going from the head unit high level output to the Rockford Fosgate high level input adapter. Then I need another adapter for going from rockford fosgate output to the speakers connector. This way I wouldn't have to cut any factory wires. Where can I buy these adapters?

Thanks.




Replies:

Posted By: KarTuneMan
Date Posted: October 17, 2005 at 12:24 AM

You will have to cut the wires...... just cut'em long (the wires on the factory plugs) so when you get rid of the car you can put it back together stock.

If your using the stock deck, and your rockford amp has high level inputs......hook up your speaker wires directly to the amp. use the outs from the deck under

the seat...!



-------------




Posted By: jazzy1986
Date Posted: October 17, 2005 at 8:04 AM
Man, I was afraid that was going to be the answer.





Print Page | Close Window