what kind fo box to use

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6449
Printed Date: June 15, 2024 at 9:07 PM

Topic: what kind fo box to use

Posted By: asdf1234
Subject: what kind fo box to use
Date Posted: December 09, 2002 at 9:19 PM

Ok I have a jl audio 500/1. I am going to get to 12"w3v2 but the thing is I love low bass but I want punch in it too(also I prefer sound quality). So I was think of putting one 12 in a big sealed b/x and the otehr in a portd box what do you guess think do you guess have a better idea

Replies:

Posted By: asdf1234
Date Posted: December 09, 2002 at 9:21 PM

also would poly fill give me lower bass in a sealed box oh and one more thin I am agianst bandpass boxes I think that they are cheating

Posted By: asdf1234
Date Posted: December 09, 2002 at 9:22 PM

lol One mroe thing I ment to say I am getting 2 12"w3v2

Posted By: asdf1234
Date Posted: December 09, 2002 at 9:22 PM

lol One more thing I ment to say I am getting 2 12"w3v2

Posted By: bberman1
Date Posted: December 10, 2002 at 10:51 AM

Would not recommend running one sealed and one ported. From the description you give above I would go sealed. Use a 1 cu/ft enclosure, and as far as the poly fill goes it your low mid response will go up but it will hit a little tighter if your going to use it fill the enclosure 50 %.

Posted By: asdf1234
Date Posted: December 10, 2002 at 1:12 PM

thanks

Posted By: bberman1
Date Posted: December 10, 2002 at 3:00 PM

your welcome

Print Page | Close Window