How to Wire Two 2 Ohm DVC Subs to 2 Ohms?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64578
Printed Date: May 15, 2025 at 6:43 PM

Topic: How to Wire Two 2 Ohm DVC Subs to 2 Ohms?

Posted By: eltaur2000
Subject: How to Wire Two 2 Ohm DVC Subs to 2 Ohms?
Date Posted: October 18, 2005 at 12:43 AM

If I have a mono amp and 2 2ohm subs, How would I wire them to run on 2ohms? Subs are L'5's

Replies:

Posted By: dwarren
Date Posted: October 18, 2005 at 1:11 AM

First of all I already showed you to figure it out, but I like repeating my self so here is where you can do it, https://www.the12volt.com/caraudio/woofer_configurations.asp.

Secondly, from the other post https://www.the12volt.com/installbay/forum_posts.asp?tid=64509&PN=1, it says you have dual two ohm subs. There is a difference between a dual 2 ohm and a single voice coil 2 ohm sub.

-------------

Posted By: dwarren
Date Posted: October 18, 2005 at 1:13 AM

Here, so no questions will be asked.... posted_image

-------------

Posted By: Blowntweeters
Date Posted: October 18, 2005 at 10:48 AM

i would suggest you get some help with your install. the questions you are asking is basic stuff. even if you have to pay a shop to install your system .it will save you money in the long run.

-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

Posted By: audiointl
Date Posted: October 20, 2005 at 4:37 AM

to eltaur:

are you sure those aren't the dual 4ohm L5s wired into 2ohm? IF they are, your choices are either 1 or 4 Ohms. I have 2 L5s in my ride, and I use separate amps for each.

-------------
Everything I touch turns to ICE

Print Page | Close Window