amp question
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64649
Printed Date: May 10, 2024 at 11:46 PM
Topic: amp question
Posted By: rottenbelly
Subject: amp question
Date Posted: October 19, 2005 at 8:55 AM
I am looking to get a good mono amp for my next setup. For a bass amp would it be better to look at singnal 2 nosie ratio or distortion percent? it is hard to find a amp with more than 90 to 95 s t n ratio. i planning on a eclipse ti 12 and maybe a sound stream amp. The sound stream was rated at 115 on signal to noise ratio, thats the highest i have seen.
-------------
rottenbellys 05 crew cab colorado.Pioneer dehp 880prs, kenwood excelon in all 4 doors. Bazooka 500 mono Jl 10w3 in coustom center console box.
Replies:
Posted By: tcss
Date Posted: October 19, 2005 at 11:50 AM
If your looking at a class D mono block amp disregard S/N ratio. They have lousy S/N ratio by design, but since your only amplifying bass it doesn't matter.
-------------
There is no such thing as free installation!
Posted By: rottenbelly
Date Posted: October 19, 2005 at 2:05 PM
OK i was wondering why they were rated so low on the class d's. thnks
-------------
rottenbellys 05 crew cab colorado.Pioneer dehp 880prs, kenwood excelon in all 4 doors. Bazooka 500 mono Jl 10w3 in coustom center console box.
|