clipping ?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64670
Printed Date: May 19, 2025 at 9:40 PM

Topic: clipping ?

Posted By: dings808
Subject: clipping ?
Date Posted: October 19, 2005 at 4:03 PM

installed 4 ch. amp and 2 ch. amp ,kickers, the 4 ch. say it 700 watts and the 2 ch. is 300 . when you turn it up loud all the mid & highs go out amp still on and no red light reading(4ch). sub still is on(2ch) when brought down the volume, it goes back on.is there a simple anwser for this?

Replies:

Posted By: DYohn
Date Posted: October 19, 2005 at 4:07 PM

How did you set the gains? What's happening to the vehicle's voltage?

-------------
Support the12volt.com

Posted By: dings808
Date Posted: October 19, 2005 at 10:31 PM

i tryed it on low and high .got a stiffing cap with digital read out and it read around 11 when car is off and about 13 to14 running

Print Page | Close Window