Pioneer KEH 2929 Display

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=64715
Printed Date: May 10, 2025 at 2:01 AM

Topic: Pioneer KEH 2929 Display

Posted By: dwdevilbiss
Subject: Pioneer KEH 2929 Display
Date Posted: October 20, 2005 at 7:34 AM

I'm installing a Pioneer KEH 2929 stereo into my Jeep Wrangler. Everything works fine except that the head unit display is too dim to read in any light conditions. There is a yellow wire from the JEEP wiring harness that is labelled 'dimmer' but there is no wire from the stereo itself.

Is there any other way to brighten up the display?

Thanks, Dave

Replies:

Posted By: rottenbelly
Date Posted: October 20, 2005 at 8:31 AM

Check with deck off, press and hold function button, then scroll thru settings to see if it has a brightness setting. most newer ones have it.

-------------
rottenbellys 05 crew cab colorado.Pioneer dehp 880prs, kenwood excelon in all 4 doors. Bazooka 500 mono Jl 10w3 in coustom center console box.

Posted By: dwdevilbiss
Date Posted: October 20, 2005 at 9:11 AM

This is a fairly old head unit, probably 10 years old. It's a Pioneer KEH 2929 cassette deck. As far as I can tell from the manual and from examining the unit, there is no function button.

Posted By: rottenbelly
Date Posted: October 20, 2005 at 1:26 PM

If its that old im not sure. dimmer wire wouldnt have anything to do with it. if it the old one with block letter display i dont think there is much u can do. time for a new deck maybe!

-------------
rottenbellys 05 crew cab colorado.Pioneer dehp 880prs, kenwood excelon in all 4 doors. Bazooka 500 mono Jl 10w3 in coustom center console box.

Print Page | Close Window