Print Page | Close Window

is this enough power ?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65018
Printed Date: June 01, 2024 at 12:03 AM


Topic: is this enough power ?

Posted By: michael38127
Subject: is this enough power ?
Date Posted: October 25, 2005 at 10:56 PM

I have three rockford p3's and 1 T8002 i want to know if this is going to be enough power for all three of the subs



Replies:

Posted By: stevdart
Date Posted: October 26, 2005 at 8:16 AM

You need to loosen up the fingers and type more info in your question.  Box type and size, impedance load on the amp, amp's power output, vehicle....  And do you have this all hooked up yet or is it sitting in the garage waiting for someone to tell you it's okay to install?



-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.




Posted By: michael38127
Date Posted: October 26, 2005 at 8:17 PM
15 inch
TypeWoofer
Voice coilConfiguration - Dual
Material - Aluminum
Description - 2.5"
Cone MaterialPoly/Plastic -

Parabolic Injection Molded Polypropylene
Frame MaterialFrame - Cast

Material - Aluminum
Surround Material 
Spider 
Crossover 
SpecificationsPower handling(RMS) - 500 Watts

Power handling(Peak) - 1000 Watts

Impedance - 2 Ohms

Sensitivity - 88 db

Vas - 145

Fs - 22

Qts - .489

Xmax - 12.0
DimensionsDepth Bottom mount - 7.7 in.

Cutout - 13.79 in.

Displacement - 184.90 cu in.

Magnet weight - 102 oz.
EnclosureRecommended Sealed (Cubic Feet) - 2.0
Recommended Ported (Cubic feet) - 2.50 @ 33Hz


2
Per channel power
posted_image
CEA-2006 compliant
125 W x 2 @ 4 Ohms RMS
250 W x 2 @ 2 Ohms RMS
400 W x 2 @ 1 Ohms RMS
500 W x 1 @ 4 Ohms Bridged RMS
800 W x 1 @ 2 Ohms Bridged RMS
Total power800 Watts
BridgeableYes
CrossoverHP 40-4kHz 24dB per Octave
LP 40-4kHz 24dB per Octave
Subsonic Filter 28Hz
Tone controlsBass Control

0 to 18 dB @ 35-70 Hz
Signal inputLow level -
Quantity - 1
Type - RCA(pr)
Line output1 RCA(pr)

Phase control 
Power inputConnector - Block
Wire gauge - 1/0 AWG
Speaker outputBlock
Power supply topology 
Output topology 
Display 
HeatsinkType -Cast

Cooling -Fan Cooled
Protection 
Remote controlIncluded
Type - Wired
Controls - Bass
ClassA/B
Marine use 
Specifications 
Stereo/Mix mono 
Frequency response20 to 20k Hz +/- .5 dB
Dimensions2.6 X 12.8 X 23 (inches)






Print Page | Close Window