Best way to hook this up?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65021
Printed Date: July 14, 2025 at 10:59 PM
Topic: Best way to hook this up?
Posted By: ms1045
Subject: Best way to hook this up?
Date Posted: October 25, 2005 at 11:10 PM
What would be the best way to hook this up.
2 6 1/2 components
2 5 1/4 components
2 4x6's
I have a 4 channel amp.
All are 4 ohm speakers
Replies:
Posted By: jeffchilcott
Date Posted: October 25, 2005 at 11:16 PM
2 questions. what ohm load is the amp stable to? Is the amp able to run a phantom channel? what type of vehicle/where are the speakers goign to be located?
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: ms1045
Date Posted: October 25, 2005 at 11:27 PM
Im not sure what ohm load the amp is stable to. It is the Alpine MRV-F345.
The speakers are in an extended cab gmc. The 6 1/2s are in the front door, the 5 1/4s are in kick panels, and the 4x6s are in the rear doors.
Im not familiar with a phantom channel.
|