Print Page | Close Window

Wiring Subs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65670
Printed Date: June 01, 2024 at 12:27 AM


Topic: Wiring Subs

Posted By: fproof
Subject: Wiring Subs
Date Posted: November 05, 2005 at 5:17 PM

Hi I have two Pioneer TS-1500SPL subs in a box, I'm trying to use a  Alpine MRD-500 amp to power them but at low sounds there alright but when you turn it up the amp cuts out.  I was wondering if anyone knows if you can run those subs on that amp or is it too small for them and how I shoud wire them. 

Thanks for you time!




Replies:

Posted By: dwarren
Date Posted: November 05, 2005 at 5:29 PM

Are the subs dual voice coil or single, and what is the resistance on them, dual 2 ohm or dual 4 ohm for example. This info is the most important here!

How is your gain set? What about your ground?



-------------




Posted By: tcbturbosux
Date Posted: November 07, 2005 at 11:51 AM
if amp is 4 ohms bridged then two subs must be dual 4

-------------
Uncle Gumby





Print Page | Close Window