Print Page | Close Window

Alpine Amp Link problem

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66075
Printed Date: September 14, 2025 at 7:37 PM


Topic: Alpine Amp Link problem

Posted By: ms1045
Subject: Alpine Amp Link problem
Date Posted: November 11, 2005 at 6:36 PM

I just installed two Alpine V12 amps. I have one F345 and one M1005. I have installed the alpine KCE-511M splitter after the headunit then ran each wire for the amplink to each amp. The headunit only will see one amp. I have them assigned 1 and 2. Amp one is on the short end of the splitter like they recommend. I can swap wires and the other amp will work, but they will not work together.

Any ideas?



Replies:

Posted By: dcbb
Date Posted: November 28, 2005 at 5:36 PM
did you get it resolved?  where di dyou purchase the kce-511m?  I have the f345 and M605 and I'm thinking of getting the amp link


Print Page | Close Window