Best way to wire these speakers?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66105
Printed Date: May 15, 2024 at 11:07 AM

Topic: Best way to wire these speakers?

Posted By: ms1045
Subject: Best way to wire these speakers?
Date Posted: November 12, 2005 at 9:08 AM

I have 2 sets of components i want in the front of my truck, one set in the door, the other in kick panels. I want to run them with my 4 channel amp. I also have 2 rear speakers that i can run with my head unit.

What is the best way to hook these 4 components up and keeping all four speakers controlled as front speakers by using the 4 channel amp?

Replies:

Posted By: DYohn
Date Posted: November 12, 2005 at 10:28 AM

Use the front RCA output from your head unit to send a signal to all 4 channels of the amp. Use Y-splitters.

-------------
Support the12volt.com

Posted By: thefivespeeder
Date Posted: November 12, 2005 at 5:00 PM

walmart 5$ a pair

here is a link but you need the opposite ones, 1 female to 2 male

https://www.walmart.com/catalog/product.do?product_id=3371474

Posted By: ms1045
Date Posted: November 12, 2005 at 5:04 PM

Thanks for the help. My amp has a switch to have channel 3 /4 work the same way as 1/2. I hooked htem up that way and ran the 4x6s off myhead unit.

Thanks again

Print Page | Close Window