One of my installers put an amp in a Nissan today and when the install was finished, the airbag light would come on and start flashing after the check. He looked over the install again to make sure nothing was left unplugged or pinched, screwed thru... all the normal procedures.. anyway, he couldn't find anything.. Finished what I was doing and checked the install out myself and everything checked out ok... this is what he did.. key on to move shifter back and pulled the dash panels off.. in doing this, he had to unplug the airbag on/off key switch for the pass airbag and the little light for 'airbag off'.. My thinking was the with having the ign on and then unplugging the switch, it sent a malfunction to the computer and it needs to be reset.. I called my other store to talk with another manager to see if he'd encountered soemthing like this. He did say that he'd seen it before and what happens is just what I had thought and that the truck would need to go to the dealer for reprogramming. He said that first thing before pulling off the dash is the neg. terminal of the Battery needs to be unhooked before hand.
Now the question... anyone else had this trouble or heard of this? and if so, is there ANY way we can reset (tried all the obvious, disconnect battery, tap it four times, sh*t like that.) reset the computer without going thru the dealer... this was one of those jobs that was for a family member of the sales manager and was doing it for free (those free ones are the ones that really put a banging on ya. )
Anyway, I have an installer that would really apperciate ANY input you can give.. post here, email me, or gimme a call at 225-343-1542 (9-6pm CT) Ask for George or Curtis
-------------
George
David's Car Stereo
Baton Rouge, LA
i have heard of this it sucks. i know check out my story in my car freekin hyundai 'ssss
anyways the speedo cable broke only from the car having 30 g miles on it and it being a 200 model anywyas. i figured it was electric like basically all cars past 98 but man was i wrong((((( dam hyundai)))) anyways i said check the fuses in the car to my girl and so she did mistake was only two things one the car has a manual cable not electric so when she checked the fuses one of the fuses was for the srs light only she pulled it out and then it was fine so she put it back in now the srs light stays on and i have two choices the fuse i can pull out and two pay 85 pucks at the dealer . oh year there little warrenty did not cover the speedo cable so that was like 40 bucks all because there was somethign wrong from the beging . even looking at this cable upon replacing it some one did not do there job right . anyways there is my story i am here we all have problems sorry i cant help you with your got any info with mine.
-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
yeah.. remember reading about your car in another post.. sorry, no info on it either.. Still can't find anything for mine either.. looks like we'll be sending it to the dealer also for reprogramming..
-------------
George
David's Car Stereo
Baton Rouge, LA
Hey Snoman,
This may sound corny but it just might work if the vehicle is 96 and newer. If you have an Autozone near you they have the diagnostic computer that can reset that for you at no charge! Let me know how it goes.
-------------
Sound Pressure
You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!
try going to this board and ask them
https://www2.4x4parts.com/cgi-local/ultimatebb.cgi?ubb=forum;f=4 its all nissans and they are super educated on all kinds of stuff like that.
ok.. problem solved.. dude went to the dealer this morning and they reset his computer for no charge.. I had a very relieved installer in the shop this morning..
thanks for the replies
-------------
George
David's Car Stereo
Baton Rouge, LA