Print Page | Close Window

alpine amp vs speaker

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66149
Printed Date: May 11, 2025 at 9:25 PM


Topic: alpine amp vs speaker

Posted By: raven2122
Subject: alpine amp vs speaker
Date Posted: November 12, 2005 at 10:33 PM

I am looking at  2 alpine SWR-1042D subs due to my lack of room and powering them with either a   MRD-M1005.  Is this a good combo and if I wanted to go up a level and went with one amp per speaker would I destroy my subs? 

-------------
nmd



Replies:

Posted By: Alpine Guy
Date Posted: November 12, 2005 at 10:43 PM
You need the SWR-1022D subwoofers if your going to use them on one amp. You could also get 2 SWR-1042D and 2 MRD-M605 's.  And if you wanted 1 M1005 on each speaker then you would have to keep the gain low and don't abuse the subs..

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.



Posted By: dwarren
Date Posted: November 12, 2005 at 10:48 PM

Sounds like over kill at that point, maybe better power handling subs would be better.



-------------


Print Page | Close Window