Print Page | Close Window

Interconnects

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66513
Printed Date: July 12, 2025 at 10:33 AM


Topic: Interconnects

Posted By: captainmillie
Subject: Interconnects
Date Posted: November 18, 2005 at 11:55 AM

1) I recently bought a Phoenix 4 gauge wiring kit, it has everything I need including 16ft. twisted interconnects. I was wondering how much difference a expensive pair of interconnects would make and if these Phoenix interconnects are good enough for me to use to connect to a Punch 500watt amp powering two 10 inch kicker comp subs.

2) I also need to know if another amp I have (a 4 channel amp) has to have two interconnects attached to it. I am a new installer. Thanks.



Replies:

Posted By: KarTuneMan
Date Posted: November 18, 2005 at 12:13 PM

1) no....save your money....if you design a high end SQ system with something more than a punch 500....maybe cinsider the cable upgrade

2) yes it need to have both sets of inputs fed...otherwise its just gonna play from 2 of the 4 channels  look at the inputs. Labeled front and rear, now look at the outputs they are (or should be) labeled the same



-------------


Print Page | Close Window