Alpine V12 amp wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=66600
Printed Date: May 19, 2024 at 3:30 PM

Topic: Alpine V12 amp wiring

Posted By: thegame3202
Subject: Alpine V12 amp wiring
Date Posted: November 19, 2005 at 2:31 PM

Hi there. I'm new to these forums but I have a quick question. I wired up part of my amp like 10 mins ago. But I don't have it completely done yet. I got the amp all wired and stuff. But I grounded the wire first. Then connected it to the amp. Nothing happened. Then I did the remote wire. Nothing happened. Then I connected the power wire. And it made a little spark. I don't know if I zapped something or anything. The power or remote wire aren't connected to anything though. So is it likely I zapped something?? Thanks.

Replies:

Posted By: Alpine Guy
Date Posted: November 19, 2005 at 5:35 PM

Thats usually normal when hooking up a new amp or one thats been sitting for a while, the internals at first draw alot of power to energize back up. No harm should have been done.

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.

Posted By: ssnds
Date Posted: November 20, 2005 at 12:14 AM

was the power wire powered when u touched it to your amp terminal? if so that might have been why..

-------------
SSounds