Crossover?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67221
Printed Date: May 07, 2025 at 7:46 AM
Topic: Crossover?
Posted By: PJX
Subject: Crossover?
Date Posted: November 28, 2005 at 7:25 PM
I'm trying to install 2 crossovers into my system. The crossover has 1 input and 2 outputs (Woofer and Tweeter). I'm wondering if i should put the inputs from the amp or do i put the inputs from the head unit? BTW it's a passive Kenwood crossover. Any help would be appreciated..Thanks.
Replies:
Posted By: auex
Date Posted: November 28, 2005 at 7:35 PM
You would use whatever input you want to run the speakers. So if you wanted them to run off of deck power then you would use the outputs from the radio. If you wanted to run them off of the amp then you would use the amp's outputs.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: jlord16
Date Posted: November 28, 2005 at 7:47 PM
Depends on the RMS of your deck and amp and how much power you want the componets to receive
-------------
Clarion DB36MP
Infinity Kappa Perfect 10"
Respone 800w Mono
ALPINE MRP-F250
*Custom fabrications*
|