Jl audio 10W6v2 vs Diamond Audio D910D2

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67420
Printed Date: May 12, 2024 at 3:17 PM

Topic: Jl audio 10W6v2 vs Diamond Audio D910D2

Posted By: ryan2100
Subject: Jl audio 10W6v2 vs Diamond Audio D910D2
Date Posted: December 01, 2005 at 5:33 PM

I am trying to find out if anyone has any experinece with the Diamond D9 subs. I am looking to run a D9 10" dual 2 ohm sub in my system. I have a new JL audio 10W6 Dual 4 ohm, and I am contemplating as to which sub to use. The Jl would be getting 300W at 2 or 8 ohm if used and the diamond would be getting 600w at 4ohm?. What sub would sound better under these conditons?

Replies:

Posted By: tcss
Date Posted: December 01, 2005 at 7:13 PM

How can you get a larger power number at 4 ohms then at 2 ohms? Are you using two differant amps?

-------------
There is no such thing as free installation!

Posted By: Teamrf
Date Posted: December 01, 2005 at 8:16 PM

I haven't heard any diamond subs in person but I've done several subs with the W6's and those are some pretty clean subs.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: ryan2100
Date Posted: December 01, 2005 at 8:37 PM

the amp that I have is a diamond audio D7152, it is 150x2 at 4ohm, 300x2 at 2ohm and 600x1 at 4ohm, The amp is not stable bridged at 2 ohm. The Jl is a dual 4 ohm, so I can only run it at either 300w at 2 ohm from 1 channel or run it at 300w at 8ohm bridged between the 2. The diamopnd is a dual 2 ohm so i can wire it to 4 ohm and thus get 600w to it.

Posted By: autotech mobile
Date Posted: December 01, 2005 at 8:47 PM

Both subs sound great. My preference is the Diamond, quality is great, sound is tight and strong, and they are capable of playing very loud.

Print Page | Close Window