2000 Ext. Cab S-10, box for one 12" pyle

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68009
Printed Date: July 19, 2025 at 2:15 PM

Topic: 2000 Ext. Cab S-10, box for one 12" pyle

Posted By: recycle_me
Subject: 2000 Ext. Cab S-10, box for one 12" pyle
Date Posted: December 08, 2005 at 10:56 PM

i have a 2000 s-10 ext cab and i would like to build a box for one 12 inch pyle (PL1290BL). just a square sealed enclosure.

-------------
!?!For You Are Crunchy and Taste Good With Ketchup!?!

Replies:

Posted By: dwarren
Date Posted: December 08, 2005 at 10:58 PM

Did you have a question? Or is this a statement?

-------------

Posted By: recycle_me
Date Posted: December 08, 2005 at 11:45 PM

question! i need the box diam. so i can build it.

-------------
!?!For You Are Crunchy and Taste Good With Ketchup!?!

Posted By: menace2sobriety
Date Posted: December 09, 2005 at 12:11 AM

whats wrong with the cardboard box it came with?Woofer Enclosures <---if you can see this click on that.

-------------

Posted By: dwarren
Date Posted: December 09, 2005 at 12:11 AM

Ok, we need the air space requirements for the sub, then the measurements from the vehicle (the area where the box will go).

Mr. sobriety has the link there for you.

-------------

Posted By: recycle_me
Date Posted: December 09, 2005 at 12:27 AM

power peak    1200
ohm     4
fs(hz) 23.2
qms     4.92
qes     .84
qts     .72
spl     85
vas     4.908

thast all i could find on the sub. i tried to use winisd but no luck. and as far as the space i dont care how big the box has to be. just make it square.

-------------
!?!For You Are Crunchy and Taste Good With Ketchup!?!

Posted By: dwarren
Date Posted: December 09, 2005 at 12:44 AM

Ok, make a box that is 15.5"(width) x 15.5" (height) x 15.5" (length) with half inch stock. This will net you an internal volume of 1.76 cuft and a damn square box.

I guesstimated on the volume requirements.

Buy a prefab box and be done with it.

-------------

Posted By: recycle_me
Date Posted: December 09, 2005 at 12:45 AM

thanks

-------------
!?!For You Are Crunchy and Taste Good With Ketchup!?!

Posted By: stevdart
Date Posted: December 09, 2005 at 7:56 PM

Ummmm....

I think someone just made up those specs you found for that sub. EBP of 27?? I second the notion of buying a pre-fab box that fits your truck. To hell with how big or little it is.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Print Page | Close Window