high to low impedance converter

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68165
Printed Date: May 13, 2024 at 6:18 PM

Topic: high to low impedance converter

Posted By: nixon75
Subject: high to low impedance converter
Date Posted: December 11, 2005 at 8:50 PM

whats a hight to low impedance converter for? how to use it?

Replies:

Posted By: jeffchilcott
Date Posted: December 11, 2005 at 9:00 PM

There are high to low adapters for the signal. But not for the impedance.

These are used for decks with no pre outs (RCA's) or factory radios

They are basically wired into the factory wires or speakrs to obtain a signal for the input stage of an amplifier

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place

Posted By: fingaz22
Date Posted: December 11, 2005 at 9:01 PM

it takes a high voltage signal and drops it down to a low voltage for the low voltage requirment on an aftermarket amp witch is commonly inbetween under one volt and upwards of 5 volts.

it will let you hook up a hu that dont have rca's and convert them so you do in simple terms

-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs

Print Page | Close Window