re-glueing speaker

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68382
Printed Date: May 20, 2024 at 12:40 AM

Topic: re-glueing speaker

Posted By: curt234
Subject: re-glueing speaker
Date Posted: December 14, 2005 at 4:48 PM

one alpine component 6.5 speaker is comming off of the base it was glued down to. Can I reglue it? Or is it garbage.

Replies:

Posted By: jstruckman
Date Posted: December 14, 2005 at 5:20 PM

Try it and see what happens. It cant hurt anything.

Jazzy

-------------

Posted By: arrow12
Date Posted: December 14, 2005 at 6:23 PM

Is it out of warranty? If it isn't, then send it to get repaired. You might have to look into new speakers.

-------------
That's my opinion. Take it, leave it, or correct me.

Posted By: Alpine Guy
Date Posted: December 14, 2005 at 7:59 PM

I got this great stuff from loctite that Steve at Adire Audio reccomended, send him a message for the name.

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.

Posted By: gus1
Date Posted: December 14, 2005 at 8:11 PM

Windshield urathane has held more than one ungued PPI together for me for quite some time. Takes a day or so to fully cure, and being black it isn't the prettiest stuff around, but it is tough stuff.

Gus

-------------
Wherever I go, that is where I end up......

Posted By: curt234
Date Posted: December 16, 2005 at 9:20 PM

I got the loctite brand super glue stuff but it dries to fast.

Posted By: fingaz22
Date Posted: December 16, 2005 at 10:00 PM

ah what the hell cold weld it . i've sucured somethings that i thought would nevr hold and there still stuck together today.

i'e even done heater control switches with it. cable type. no problem just use a little more of the cure than the base and your golden.

i've even done oil pans on then old beater mersades 190e's where the customer can't even afford gas so a quick fix is all you can do. thats still holding for the last year and that is a bad spot right on the front of the pan where everthing hits it. sitll there.

-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs

Posted By: Steven Kephart
Date Posted: December 16, 2005 at 11:04 PM

Here's the Loctite stuff Alpine Guy was talking about: https://www.amazon.com/gp/product/B000132VUI/qid=1134795700/sr=8-1/ref=sr_8_xs_ap_i1_xgl60/104-5186683-5165548?n=507846&s=hi&v=glance