building sealed box for 2 woofers?

when building a sealed box for 2 woofers, i want both to have 1.05 cubes each, so 2.1 total, should i have them in one air space, or have a divider between the subs. I have seen both, just wanted to know if anyone knew or had opinions. thanks... sq setup, not spl, if that makes a difference.

-------------
99 Blazer LT.   Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

you sohuld be safe with 1 chamber. it shouldn't make that huge of a difference with the smallerish boxes.

define safe? because it doesnt matter to me, just means i add 3/4" on overall length. i want whatevers best.

-------------
99 Blazer LT.   Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

The same either way.  Build it the way that suits you best.  For myself, and I gather you too, putting the extra time, effort and materials into it by building a center baffle is the way I would tend to go.  The divider will add support to the weakest section of the box. 

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

if stedvart says it, it must be true... hehe. Doing the center devide. PERIOD. thanks

-------------
99 Blazer LT.   Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)