Print Page | Close Window

Can you connect two sets of wires to one speaker?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6904
Printed Date: July 05, 2025 at 7:42 PM


Topic: Can you connect two sets of wires to one speaker?

Posted By: Lee280zx
Subject: Can you connect two sets of wires to one speaker?
Date Posted: December 19, 2002 at 9:42 PM

I have an '82 ZX with a voice warning system that I like.  If you bypass the factory wiring to the left front speaker, you lose the voice warning.

One solution to this would be to wire the factory wiring to a new small speaker somewhere else.

Another, the one I'm asking about, would be to wire both the aftermarket wires and the stock wires to the left front speaker.  But somehow I don't think this would work.  Will it?

Thanks!




Replies:

Posted By: bberman1
Date Posted: December 20, 2002 at 11:08 AM
I have done it before with out a problem but not in that car. However I would suggest using a separate speaker if possible.



Posted By: themagicone
Date Posted: December 21, 2002 at 10:13 AM

you could use a relay too.





Print Page | Close Window