2001 Ford Explorer Sport 4 Channel Amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69228
Printed Date: May 06, 2024 at 7:04 PM

Topic: 2001 Ford Explorer Sport 4 Channel Amp

Posted By: warpedimage3
Subject: 2001 Ford Explorer Sport 4 Channel Amp
Date Posted: December 26, 2005 at 6:25 PM

I am going to be installing a 4 channel amp into a 2001 Ford Explorer Sport and i was wondering if i am going to have to bypass the factory amp inorder to use the speaker wires from behind the radio to connect to the amp. Also if there is anything else i should know about this car please let me know if you have any pointers. thanks.

Replies:

Posted By: geepherder
Date Posted: December 26, 2005 at 6:56 PM

You could do that, but where is your new amp going? If it's going in the back, the factory amp is in the rear quarter. You can get an amp bypass harness to plug into the factory speaker output harness that plugs into the factory amp, and run that directly to your amp. It's up to you.

-------------
My ex once told me I have a perfect face for radio.

Print Page | Close Window