selecting box?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69594
Printed Date: May 17, 2025 at 1:35 AM

Topic: selecting box?

Posted By: skrewdriver88
Subject: selecting box?
Date Posted: December 30, 2005 at 5:48 PM

I have 2 Alpine 1042D subs and i was wondering if anybody knows what kind of box i should use. I was thinking a ported box but i don't know what to look for in a ported box. So if somebody could point out a good one for my subs or could tell me what to look for. Oh yeah my amp is a Rockford Fosgate T10001bd and i am going to wire it down to 1 Ohm. Thanks

Replies:

Posted By: fingaz22
Date Posted: December 30, 2005 at 7:26 PM

you should try to get close as you can to the factory spec of your sub as you can. considering the box design it will perform the best in a inclosure made to spec.

try googling your sub if you don't have the factory spec. i'm sure you will find them.

-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs

Print Page | Close Window