Speaker wire to use w/ MTX 9500

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69934
Printed Date: May 11, 2024 at 4:30 PM

Topic: Speaker wire to use w/ MTX 9500

Posted By: image
Subject: Speaker wire to use w/ MTX 9500
Date Posted: January 03, 2006 at 12:45 PM

Guys im getting some mixed answers and was wondering if someone with expierence can iron them out for me. I would like to get the most out of my 12" 9500's while using a MTX TA92001 amp. Someone told me i could actually use 8 guage power wire and that would power it more efficiently than normal speaker wire? Is this true? Thanks!!

Amp: https://www.mtx.com/caraudio/products/amplifiers/thunder92001.cfm
Subwoofer:
https://www.mtx.com/caraudio/products/subwoofers/thunder9500.cfm

Replies:

Posted By: DYohn
Date Posted: January 03, 2006 at 2:37 PM

Try this calculator and look at the very small difference in delivered db in different speaker wire gauge sizes:

https://www.h-o-alternators.com/TechCalcs/speakerwireselectorassistanthoalt.swf

-------------
Support the12volt.com

Posted By: alpine_king
Date Posted: January 03, 2006 at 8:47 PM

use 8 gauge at least going from the amp to the sub.

-------------
1993 Ford Ranger.
Head Unit.Alpine CDA-9831
Front Speakers.Infinity 6010 Reference Series
Amp.Alpine MRD-M1005
Subs.3 Kicker CVR10
Rear Speakers.SPL CS-573
20" Boss 312's, lowered 3/4

Print Page | Close Window