Jensen vm9410 problem
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=69968
Printed Date: May 14, 2024 at 2:51 AM
Topic: Jensen vm9410 problem
Posted By: 92caddy
Subject: Jensen vm9410 problem
Date Posted: January 03, 2006 at 7:28 PM
I am helping a buddy wire up the vm9410 head unit and we can't get a picture in the front zone on this unit. I have all the right wires hooked up according to the manual. The car is a 95 ford explorer. Has anyone had any problems like this before-can you help with some info-Thanks
Replies:
Posted By: ssnds
Date Posted: January 03, 2006 at 8:08 PM
Front Zone? I see on the specs is says Double-Zone. I'm not familar and not fond of jenson. Meaning the 7'' screen or underneath? Have you tried reading the manual? That's all I can help with. good luck
-------------
SSounds
Posted By: xtremca2003
Date Posted: January 03, 2006 at 9:51 PM
Is any wiring that needs to be hooked up to allow moving video? Many units require a ground on the park brake input to unlock the any video other than GPS.
chris
|