GM Scan Tool
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70178
Printed Date: October 31, 2024 at 7:08 PM
Topic: GM Scan Tool
Posted By: Velocity Motors
Subject: GM Scan Tool
Date Posted: January 06, 2006 at 11:27 AM
Does anyone know what the procedure is for resetting the Class II radio's on a GM scan tool ? I have one that needs to be reset to another vehicle & my friend with the scan tool has never reset a radio with a new VIN before. TIA
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Replies:
Posted By: kgerry
Date Posted: January 06, 2006 at 5:09 PM
you need to do radio setup which will burn the VIN into the radio.... go into body, special features and radio setup....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: sparkie
Date Posted: January 07, 2006 at 11:10 AM
Depending on the radio the Tech II may not set up the radio. Some truck radios require software be downloaded from a dealers computer through the use of a Tech II tool.
-------------
sparky
Posted By: kgerry
Date Posted: January 07, 2006 at 2:11 PM
depending on the chassis you may also need the CANDI module attached to the Tech II.......
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
|