Lost Power to Amps?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70447
Printed Date: May 10, 2024 at 11:40 AM
Topic: Lost Power to Amps?
Posted By: ago0606
Subject: Lost Power to Amps?
Date Posted: January 09, 2006 at 11:44 PM
I have a 2005 Tahoe and Alpine E320 EQ, JLAudio 1000/1 amp, and JLAudio 4 channel amp. I disconnected the power under the hood at the fuse to run a new remote wire. I reconnected everything the same way, but when I turn it on now my amps don't come on. The EQ doesn't read any signal and the amps show no power. Any thought on this?
Replies:
Posted By: menace2sobriety
Date Posted: January 09, 2006 at 11:50 PM
did the fuse blow when you put it back? or are you sure you have the remote wire correct. check all leads with a dmm, and then post what you have found.
-------------
Posted By: memphis11223344
Date Posted: January 11, 2006 at 10:21 AM
the remote would be a blue wire with a white line going down it if you still dont get no power check the fuse on the batt and if thats fine then check the fuse on your distrubution block if you have one and if thats fine or if you dsont have one then check the fuse on the amp itself and if that still doesnt work then dissconnect the remote wire and touch it on the 12 volt power sourse and see if it turns on that way. post on what goes on
-------------
6 memphis PR 15's sealed enclosure. indash mobile video system. alphasonik HC800PMA 3000 rms
MECP first class installer
|