Gm-510T and two TS-W1041DVC’s

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70508
Printed Date: May 13, 2025 at 1:14 AM

Topic: Gm-510T and two TS-W1041DVC’s

Posted By: dostuff67
Subject: Gm-510T and two TS-W1041DVC’s
Date Posted: January 10, 2006 at 9:05 PM

To start off with I know very, very little about car audio equipment so please bare with me as I try to explain the ordeal. I recently bought a 760 watt Pioneer amp ( Gm-510T) and 2 Pioneer Premier subs ( TS-W1041DVC) which are 800 watts each. The instructions on the amplifier says DO NOT hook it up 4 ohms, they tell you to use 8 ohms. I'm not even sure the amp and subs are compaitable with eachother. Does anyone know? And if they are how would I go about wiring them? Thanks!

Replies:

Posted By: geepherder
Date Posted: January 10, 2006 at 9:32 PM

Those subwoofers are dual 4 ohm voice coils, so they can be wired to either 2 or 8 ohms each. I recommend connecting the subs together in a series parallel wiring for a 4 ohm load. Look to the left side of this screen and scroll down to woofer wiring under car audio.

According to Pioneer's website, that amp is stable to 4 ohm's bridged: https://www.pioneerelectronics.com/pna/product/detail/0,,2076_273305597_274027126,00.html

-------------
My ex once told me I have a perfect face for radio.

Posted By: dostuff67
Date Posted: January 10, 2006 at 9:45 PM

Thanks dude!

Print Page | Close Window