Print Page | Close Window

No dash lights on ’00 Galant

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70514
Printed Date: May 13, 2024 at 7:32 PM


Topic: No dash lights on ’00 Galant

Posted By: tcelestin
Subject: No dash lights on ’00 Galant
Date Posted: January 10, 2006 at 10:24 PM

Hi Guys,

Just installed an Alpine receiver in an '00 Galant, Yes! I used an adapter harness, but now dash lights dont come on.  Harness says BLACK / YELLOW is Illum, but your info page says GREEN / WHITE.  Have checked both with no luck,  Checked for fuses--all accounted for.  Even checked for burnt bulbs--nope, each works.  Oh,  and also checked bypassing dimmer swtich...

and get this...the d**** lights WORK when I put the old stereo in!  (that I will need a code for if I leave it in--dont really want to do that)

Anyone who has installed in a Galant Please Help!!!!!




Replies:

Posted By: geepherder
Date Posted: January 10, 2006 at 10:37 PM

Disconnect the dimmer/illumination wires from the harness and tape them off- you won't need them.  It sounds like you've crossed a couple wires and connected a dimmer to an illumination wire or something, but they aren't necessary.  Just be glad your dash lights still work and the dimmer switch isn't fried.



-------------
My ex once told me I have a perfect face for radio.




Posted By: tcelestin
Date Posted: January 10, 2006 at 10:38 PM

**Revised**

Just installed an Alpine receiver in an '00 Galant, Yes! I used an adapter harness, but now dash lights dont come on.  Harness says BLACK / YELLOW-factory/ ORANGE / white-aftermkt harness,  is Illumination, but your info page says GREEN / WHITE-factory/plain Orange-aftermkt (which also says "not used" in instructions).  Have checked both with no luck,  Checked for fuses--all accounted for.  Even checked for burnt bulbs--nope, each works.  Oh,  and also checked bypassing dimmer swtich...

and get this...the d**** lights WORK when I put the old stereo in!  (that I will need a code for if I leave it in--dont really want to do that)

Anyone who has installed in a Galant Please Help!!!!!





Posted By: tcelestin
Date Posted: January 10, 2006 at 10:43 PM
Thanks for the tip Geepherder...I will give that a try....




Posted By: memphis11223344
Date Posted: January 12, 2006 at 10:02 AM
try checking the fuse box. somtimes you can blow a fuse. your dash lights are rated a 25a fuse cuz thats the acc. if you look on the fuse box panal that you took off there should be a digram of all the fuses try taking out the acc fuse with the required fuse remover that is stuck inside the fuse box. if its blown then reaplce it with a spare

-------------
6 memphis PR 15's sealed enclosure. indash mobile video system. alphasonik HC800PMA 3000 rms
MECP first class installer





Print Page | Close Window