How to connect 2 Ai-net devices to alpine

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70553
Printed Date: May 14, 2025 at 2:40 AM

Topic: How to connect 2 Ai-net devices to alpine

Posted By: M3drvrr
Subject: How to connect 2 Ai-net devices to alpine
Date Posted: January 11, 2006 at 4:40 PM

I have a CDA-9851 and i want to connect both the alpine ipod interface (uses ai-net wire) and an sirius radio.

I got the surius sat receiver, and it only has rca outputs.

How can i connect both of these to the HU because the HU does not have rca inputs.

Thanks in advance, any help is appreciated

Replies:

Posted By: geepherder
Date Posted: January 11, 2006 at 7:10 PM

You may be able to use one of these: https://www.crutchfield.com/S-HT9yde3Ip38/cgi-bin/ProdView.asp?g=251650&I=500KCA801B.

-------------
My ex once told me I have a perfect face for radio.

Posted By: djdrew44
Date Posted: January 26, 2006 at 11:47 AM

You should have gotten this: https://www.directed.com/audio/sirius/connect.asp#sc_sirALP1

I just installed it in my Camry with an Alpine AINET HU & Changer.

It has a loop through for the changer connection.

Print Page | Close Window