2003-2004 ram 2500 radio removal

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70624
Printed Date: May 11, 2025 at 7:01 AM

Topic: 2003-2004 ram 2500 radio removal

Posted By: draasch
Subject: 2003-2004 ram 2500 radio removal
Date Posted: January 12, 2006 at 3:34 PM

does anyone know how the radio comes out on this truck????

thanks,
david

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Replies:

Posted By: sparkie
Date Posted: January 12, 2006 at 4:55 PM

As far as I can remember their is only one screw below and to the right of the radio inside a pocket. The rest of the plate that surrounds the radio and cluster is held in by clips. Pull the plate towards you to disengage the clips. You can then remove the 4 screws holding in the radio and pull it out.

-------------
sparky

Posted By: ohlarikd
Date Posted: January 12, 2006 at 9:23 PM

sparkie wrote:

As far as I can remember their is only one screw below and to the right of the radio inside a pocket. The rest of the plate that surrounds the radio and cluster is held in by clips. Pull the plate towards you to disengage the clips. You can then remove the 4 screws holding in the radio and pull it out.

YEP! I have an 05 Ram 2500. One screw inside the hook at the lower right corner of that bezel. Take that out, then gently pry around the whole bezel. It actually comes out with not much force, so nothing should break.

Derek