Sound from the CD but not from the Radio

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70763
Printed Date: May 12, 2024 at 12:03 AM

Topic: Sound from the CD but not from the Radio

Posted By: Raider4Life
Subject: Sound from the CD but not from the Radio
Date Posted: January 14, 2006 at 2:18 PM

I am a rookie when it comes to doing installations, and I have just come across a situation that I cannot get myself out of. I just finished installing an Alpine CDA-9853, along with a Kenwood EQ KCD-6042A. The problem I am having is that I get full power from my amps when I use the CD player and I do not get any power when I switch from CD to tuner. I would appreciate any feedback on this situation. One more thing to add, I have the yellow wire on the EQ conected to the yellow 12 volt memory on the radio. Black on the EQ is connected to the power antenna, and the Blue/White is connected to the remote wire on the radio.

Replies:

Posted By: kirktcashalini
Date Posted: January 14, 2006 at 5:25 PM

i would definatly check the antenna, and make sure that is hooked up with much certainty. only thing differing the cd player and the tuner seems to be the antenna to me? good luck though.

-------------
99 Blazer LT. Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

Posted By: furflier
Date Posted: January 14, 2006 at 8:54 PM

Raider4Life wrote:

One more thing to add, I have the yellow wire on the EQ conected to the yellow 12 volt memory on the radio. Black on the EQ is connected to the power antenna, and the Blue/White is connected to the remote wire on the radio.

Correct me if I am wrong but your black wire should be going to ground.

-------------