diamond shaped wall decision?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70810
Printed Date: November 04, 2025 at 6:55 AM

Topic: diamond shaped wall decision?

Posted By: 1 4u2nvy
Subject: diamond shaped wall decision?
Date Posted: January 15, 2006 at 1:07 AM

ok fellas, i have a 93 nissan hardbody kingcab 4 MA Audio 1550 subs now i was going oto just put a standard wall in the truck but then i got to thinking and thought about doing something a lil diffrent and do a diamond shaped wall wand put the sibs one on each side of the diamond i was just wondering if anyone else has done this and how to figure the size of the port and if anyone had any other crazy ideas....drop a line....

Replies:

Posted By: menace2sobriety
Date Posted: January 15, 2006 at 3:33 AM

i have seen it done. many many times. for the port or ports use winISD to figure that out. do you want all the subs to share the same air space or each in thier own cabin?

-------------

Posted By: kirktcashalini
Date Posted: January 15, 2006 at 12:17 PM

yeah i have seen it. i have seen hex walls, and everything. make sure the subs are ok to be fired down or up depending on the mounting angle of it all. whould be alot of work, but pretty damn sweet when its done. gl

-------------
99 Blazer LT. Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)

Posted By: 1 4u2nvy
Date Posted: January 15, 2006 at 11:53 PM

i think i am goin to have them all share the same air space, but im not positive yet... yea i figured it woul dbe a lot of work, but i am in no big hurry i got a system in t now that works fine i just want something bigger.

Print Page | Close Window