4 Ohm DVC What to Do?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70915
Printed Date: May 15, 2024 at 11:28 AM
Topic: 4 Ohm DVC What to Do?
Posted By: Dsteinmann
Subject: 4 Ohm DVC What to Do?
Date Posted: January 16, 2006 at 3:46 PM
OK i Have a 12" HE2 dual 4 ohms Sub. SO it will run at 2 or 8 ohms and i have a Rockford power amp 250.2 thats 2ohm stereo, so Schould i bridge it to 2 ohms even though its says 4 ohm bridged or brige it at 8 ohms. I think id rather run it at 2ohms. would that be all right, wouldnt it just get hot and turn off if its not stable. I wont be running it very hard
Replies:
Posted By: forbidden
Date Posted: January 16, 2006 at 4:20 PM
Wire the sub to 8 ohms and connect it to the bridged terminals of the amp. While the power series of amps can do 2 ohm mono, they can do it for a finite period of time before the thermal switch turns the amp off. Play it safe unless a new amp is in your immediate future.
-------------
Top Secret, I can tell you but then my wife will kill me.
Posted By: Dsteinmann
Date Posted: January 16, 2006 at 4:28 PM
Do you know how much wattage it would be getting at 8ohms 4 ohms is about 320 watts
Posted By: stevdart
Date Posted: January 16, 2006 at 4:58 PM
To find power for 8 ohm bridged, use the stereo 2 X __ watts @ 4 ohm rating of the amplifier. The output would be the same as the total output of that rating, both channels.
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Posted By: Dsteinmann
Date Posted: January 16, 2006 at 8:08 PM
so 4 ohms x 2 is 100watts so Roughfuly about 200Watts at 8Ohms And you dont recomend running it a 2 ohms I have a 800 whats 2channel would that be better bridged at 8 ohms which would be 960x1 at 4 ohms The Sub is 400rms 800 peak would that be too much power What do you recomend
Posted By: fingaz22
Date Posted: January 16, 2006 at 8:30 PM
what kind of amp is the 800 watt?
-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs
Posted By: Dsteinmann
Date Posted: January 16, 2006 at 8:39 PM
Rockford 800.2 Power Amp
|