Memory, Constant Power Wire, 97 Mirage

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71257
Printed Date: May 16, 2024 at 12:29 PM

Topic: Memory, Constant Power Wire, 97 Mirage

Posted By: jdkoppel
Subject: Memory, Constant Power Wire, 97 Mirage
Date Posted: January 22, 2006 at 1:51 AM

my head deck resets itself evry time the ignigtin is turned off. After taking the headdeck out i cant find which to wires to connect as the memory wire. I have a pioneer deck and a mitsi mirage 97.

would really appreciate any help.

Replies:

Posted By: pss5075104
Date Posted: January 22, 2006 at 9:46 AM

i am going to assume that the deck was hard wired. Take the yellow off the pioneer deck to the RED / black from the cars wiring harness.

-------------
D

MECP First Class Certified Installer.

Nothing is impossable, it's just more expensive.

Posted By: jdkoppel
Date Posted: January 22, 2006 at 4:50 PM

ok and do what with the blue wire (from the harness) that was connected to the yellow?

cheers

Posted By: nstaller36695
Date Posted: January 23, 2006 at 2:22 AM

ok first the blue wire is output only. u need to read the manual and get a proper diagram for wire color and there isnt a ground wire on the harness so ground the black wire from the radio to metal and make sure u test ground with a meter but the red wire is for ignition and yellow is for memory which should be 12 volts with the key on or off.

-------------
the best part of a job is seeing the bumper get smaller over the horizon

Print Page | Close Window