Print Page | Close Window

missing harness for Kenwood KCA-R41FM

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71305
Printed Date: April 23, 2024 at 12:15 PM


Topic: missing harness for Kenwood KCA-R41FM

Posted By: Acuraxtasy
Subject: missing harness for Kenwood KCA-R41FM
Date Posted: January 22, 2006 at 9:12 PM

I have a Kenwood KCA-R41FM6 disc modulated changer( manufactured around 1996), during a move I lost the 4 wire harness/plug.  I need to hard wire it at the power input, if you have a diagram please foward it.           Thanks



Replies:

Posted By: fingaz22
Date Posted: January 22, 2006 at 9:19 PM

you can get a aftermarket harness that will fit it so you don't have too hard wire it. if you show me a pic of it then i probably have one i could sell for cheap.

or if you still want to hard wire it , contact the manufacture for a schematic of the unit. if they will supply you one. you will need inorder to hard wire the unit.



-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs




Print Page | Close Window