Steering Wheel Remote Buttons

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71638
Printed Date: July 07, 2025 at 4:57 PM

Topic: Steering Wheel Remote Buttons

Posted By: mpuck972
Subject: Steering Wheel Remote Buttons
Date Posted: January 27, 2006 at 5:10 PM

I have a 2005 Nissan Frontier with integrated steering wheel remote control. I recently installed a Pioneer AVIC-D1 that has the remote input. I also bought the PAC adapter to allow for the use of steering wheel controls. Does anyone know what wire im supposed to use to interface with the pac unit? Im sure its in one of the leftover plugs behind the stereo, im just not sure which one.

Thanks

Replies:

Posted By: tcss
Date Posted: January 27, 2006 at 6:16 PM

Shouldn't the instructions for the Pac adaptor ID that wire?

-------------
There is no such thing as free installation!

Posted By: geepherder
Date Posted: January 27, 2006 at 8:36 PM

Yeah, check the instructions. It doesn't have 2005 listed, but it should be the same as the previous years. According to the papers, it should be yellow/red (behind the radio). It says to also connect yellow/black to ground. To test the wire, it should rest at +5 volts and read anywhere between 0 and 5 when a button is pressed.

-------------
My ex once told me I have a perfect face for radio.

Posted By: mpuck972
Date Posted: January 28, 2006 at 11:04 AM

In the instructions, the vehicle wire color colum is blank. I will try geepherders suggestion, and look for a wire that changes voltage.

Print Page | Close Window