woofer wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71701
Printed Date: May 16, 2024 at 6:23 AM

Topic: woofer wiring

Posted By: silverstinger
Subject: woofer wiring
Date Posted: January 28, 2006 at 6:58 PM

I have a svc 8ohm Boston Pro 10". This is powered by a 4180c xtant using the rear channels bridged. Is there anything that can be put inline or done to show the amplifier a lower ohm rating to increase power delivered to driver.

Thanks

Replies:

Posted By: fingaz22
Date Posted: January 28, 2006 at 7:36 PM

no ,but you can get another 10 and then would be able to drop the ohm load.

-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs

Posted By: silverstinger
Date Posted: January 28, 2006 at 7:56 PM

Thanks, I didn't think I could but was not sure. Was looking for a possible quick fix. I do have a match to this sub but hav not had the time to build custom boxes. The installation is under rear seat in silverado.

Print Page | Close Window