Kenwood Ez500 Preouts

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71726
Printed Date: May 02, 2024 at 2:51 AM

Topic: Kenwood Ez500 Preouts

Posted By: foshizl
Subject: Kenwood Ez500 Preouts
Date Posted: January 29, 2006 at 12:03 AM

The manual says that in order to get some of the functions to work on the deck that in the menu you have to switch it from rear preouts to SWpreouts.... the deck itself only has front and then another set which are determined by how the deck is setup... the manual doesnt say how to change between rear and SWpreouts.... any ideas?

thanks,

Kevin

Replies:

Posted By: geepherder
Date Posted: January 29, 2006 at 1:22 PM

Check with your local Kenwood dealer, call tech support, or grab a tech savvy friend and start pushing buttons. Just go in the menu and keep searching all the different options until you find it.

-------------
My ex once told me I have a perfect face for radio.

Posted By: lspker
Date Posted: January 29, 2006 at 7:14 PM

Pretty sure it tells you in the mannual, and you answered the question in your post. For use of sub out put, you switch the preout in the menu.

Not having the mannual in front of me, you put the deck in standby , enter the menu, scroll down to rear pre out. then switch between rear or sub. Turn on deck, use menu to adjust crossover point.

Print Page | Close Window