No Sound

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71963
Printed Date: July 12, 2025 at 3:59 AM

Topic: No Sound

Posted By: rasco1982
Subject: No Sound
Date Posted: February 01, 2006 at 8:46 AM

I have purchased two Hifonics TX1005D amps, the amp is a class D 1000 watts single channel. My brother has an amp and subs already in his car. When we removed his amp and placed my amp in his car the power is on the amp but no sound is going to the sub. Is there something missing that this amp needs because his amp is an A/B class amp?

-------------
rasco1982

Replies:

Posted By: DYohn
Date Posted: February 01, 2006 at 9:53 AM

Did you set the gain properly on the new amp? What's the impedance load?

-------------
Support the12volt.com

Posted By: rasco1982
Date Posted: February 01, 2006 at 3:47 PM

I did not set anything on the my amplifier I just disconnected his amp and placed my amp in. The amp is one ohm stable, it produces 350watts at 4ohms, 700watts at 2ohms and 1000watts at 1ohm. Do you think I caused some kind of permanent damage to my amp by doing this?

-------------
rasco1982

Print Page | Close Window