New HO alternator vs. stock rebuild
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72009
Printed Date: May 02, 2024 at 11:59 PM
Topic: New HO alternator vs. stock rebuild
Posted By: customsound79
Subject: New HO alternator vs. stock rebuild
Date Posted: February 01, 2006 at 10:04 PM
I found a local alternator rebuilder that said they could re-wind my factory alternator to 200+ amps for about $100. Could this be a viable option over buying a $300 new model with the larger case and such?
------------- My wife will never understand why, lucky for her!
Replies:
Posted By: forbidden
Date Posted: February 01, 2006 at 11:22 PM
No, all this does is put more heat into the same size case, end result is a alternator that will fail even faster than it did before.
------------- Top Secret, I can tell you but then my wife will kill me.
Posted By: customsound79
Date Posted: February 02, 2006 at 8:12 AM
That makes perfect sense. Thanks for the help!
------------- My wife will never understand why, lucky for her!
Posted By: Alpine Guy
Date Posted: February 02, 2006 at 10:50 AM
Yup, and most likely he can wire it to 200 amp , , but probably has ZERO idle output and the 200 amp output is probably at about 9 grand on the ticker. The HO alts specificaly built will give you a high output at idle and top out just above your normal driving rpm making them very useful.
------------- 2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.
|