Print Page | Close Window

XM-3e Remote Sub Level Control

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72016
Printed Date: July 15, 2025 at 2:27 PM


Topic: XM-3e Remote Sub Level Control

Posted By: dahcmed
Subject: XM-3e Remote Sub Level Control
Date Posted: February 01, 2006 at 11:06 PM

Does anyone have a wiring info for the remote sub control for an XM-3e? This things pretty old and I couldn't find the remote control. Pls help. It's an RJ-45 sort of plug.



Replies:

Posted By: dahcmed
Date Posted: February 05, 2006 at 9:55 AM
Anybody willing to dismantle theirs and give me schematics :)



Posted By: Ravendarat
Date Posted: February 06, 2006 at 3:55 AM
You'ld have to find some one with one first. I have been around for 6 years and have never even seen this thing you are talking about. What is it exactly. Something to control the input level on an amp for subs?

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer



Posted By: dahcmed
Date Posted: February 06, 2006 at 5:57 AM

Xm-3e is a Coustic 3-way Active Crossover (https://coustic.com/classic/PDFs/XM-3e.pdf). It has a Remote Sub Level control interface cable similar to that for mono amps remote sub level control. A general description available here https://www.sounddomain.com/sku/COURS.

All I know is that it uses an RJ-11 (6 conductors) plug and a 20k potentiometer (info c/o Coustic tech support, though they won't release any schematic).


Print Page | Close Window