4 channel line out converter

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72045
Printed Date: May 05, 2024 at 1:33 PM

Topic: 4 channel line out converter

Posted By: IIrjII
Subject: 4 channel line out converter
Date Posted: February 02, 2006 at 12:38 PM

Has anyone ever used the 4 chnl line out converter from install edge? I see that if you use it, you can tag the blue wire into the factory speaker output, and the blue wire on the rca side will act as a remote turn on wire. How is it supposed to be hooked up? I've never used it, and I want to start using it rather than tagging an accessory wire for remote turn on. Thanks

Replies:

Posted By: IIrjII
Date Posted: February 03, 2006 at 12:33 PM

Anyone??

Posted By: nstaller36695
Date Posted: February 03, 2006 at 5:45 PM

the instructions should tell you everything u need to know i personally havent used one in years

-------------
the best part of a job is seeing the bumper get smaller over the horizon

Posted By: stevdart
Date Posted: February 03, 2006 at 5:50 PM

There are other makes that use this principle. The LOC will convert the voltage it picks up from the speaker output into a 12 volt source, which will allow turn-on. I don't have experience with this type because I fear it might not pick up enough voltage as soon as the deck is turned on. I wouldn't want to mess around with troubleshooting something like this, or hear a thump when the amp comes on...anything like that. But IIRC, someone on this forum some months back said that he has used this type several times and never had a problem with turn on function.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.