Rockford Fosgate 900 watt 4 channel
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72132
Printed Date: May 20, 2024 at 10:04 PM
Topic: Rockford Fosgate 900 watt 4 channel
Posted By: Rkodis
Subject: Rockford Fosgate 900 watt 4 channel
Date Posted: February 03, 2006 at 8:25 PM
I need help figuring out how to wire the subs to the fosgate 900 watt amp.
it has 4 channel. I have 2 subs SVC. I believe they are 4 ohm impedance.
Replies:
Posted By: jlord16
Date Posted: February 03, 2006 at 9:10 PM
if they are four ohm then you can simply bridge channel 1 and 2 to one sub and then channel 3 and 4 to one sub
-------------
Clarion DB36MP
Infinity Kappa Perfect 10"
Respone 800w Mono
ALPINE MRP-F250
*Custom fabrications*
Posted By: Rkodis
Date Posted: February 04, 2006 at 5:04 PM
I have tried, but for some reason there is no sound coming from the opposite sub,
both subs work, all channels. work
Im only using one pair of rca's could that be the problem?
Posted By: Rkodis
Date Posted: February 04, 2006 at 5:04 PM
I have tried, but for some reason there is no sound coming from the opposite sub,
both subs work, all channels. work
Im only using one pair of rca's could that be the problem?
Posted By: ddsubman
Date Posted: February 04, 2006 at 7:15 PM
Yes. Hook up all rca inputs on amp. If you only have access to one pair of rca cables at amp, buy a splitter and that should solve your problem.
-------------
Gettin' deafer by the day.......96' GMC yukon-Eclipse CD 5442HU
MA Audio HK4000D-Digital Designs 9515F
150+db with one woofer...DD rules!!!!
Posted By: Rkodis
Date Posted: February 05, 2006 at 9:17 PM
I have a subwoofer output on the deck, which i used to hook up into the amp. so what is it that i need to do?
Posted By: Rkodis
Date Posted: February 05, 2006 at 9:18 PM
I mean i have one pair of subwoofer RCA output, which i used to run it to the amp. NOw how do i wire up the speakers to the amp
so they all bump?
Posted By: Ravendarat
Date Posted: February 06, 2006 at 3:18 AM
Go buy 2 sets of RCA splitter cables that have two male ends and one female end. Plug the males into the amp so it turns your 4 rca inputs into two then plug in your sub out cables from the deck and you are good to go.
-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
|