Looking for pix of orion beast internals
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72133
Printed Date: May 04, 2024 at 11:21 AM
Topic: Looking for pix of orion beast internals
Posted By: samrock
Subject: Looking for pix of orion beast internals
Date Posted: February 03, 2006 at 8:31 PM
ok i am workin on a concept 97.3 and to me it looks like a 2250 i have compaired the pix i found on the net. i cannot find any for 2100 or 2150. if you have any pix of the internal board of orion beast amps 2100 2250 2150 2125 or 97.3
please lable them with the ampmodel number and send them to kewlcat_68@yahoo.com Thanks a lot in advance for the help
sam ------------- OF ALL THE THINGS I HAVE LOST I MISS MY MIND THE MOST!
Replies:
Posted By: dwarren
Date Posted: February 03, 2006 at 9:58 PM
Have you tried this site yet? -------------
Posted By: haemphyst
Date Posted: February 04, 2006 at 11:45 AM
dwarren wrote:
Have you tried this site yet?
DOOD!!! Tha is a COOL site! How does anybody find stuff like that? I am at my computer 12-16 hours a day, and HALF of that is on the 'net, and I have never even THOUGHT of looking for something like that... :) ------------- It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: samrock
Date Posted: February 04, 2006 at 4:51 PM
ok i am workin on a concept 97.3 and to me it looks like a 2250 i have compaired the pix i found on the net. i cannot find any for 2100 or 2150. (including this site) the best place to find pix of amps in on EBAY lol.. i wish they would not have taken the seach of compleated auctions option away lol. thanks to every one that as sent pix of the amps. i am going to put a page together when we are done with this project with the differances of all these amps.. i am trying to get my hands on a few diff models to see what can be changed in the lower lines for them to put out more power.. a bit far fetch from what it started as to just repair the amp i baught of ebay that was supposed to be in working order.. but i wish i had someone to help me on this. so i will make the info ez for the next person ------------- OF ALL THE THINGS I HAVE LOST I MISS MY MIND THE MOST!
Posted By: kirktcashalini
Date Posted: February 04, 2006 at 11:07 PM
WOW, pretty awesome site. Are there any websites like this for sub disections? Obviously more pricy to get everyone to chop their subs in half. But even a bunch of manufacturers cut away pictures or anything.
-------------
99 Blazer LT. Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)
Posted By: dwarren
Date Posted: February 05, 2006 at 12:15 AM
haemphyst wrote:
dwarren wrote:
Have you tried this site yet?
DOOD!!! Tha is a COOL site! How does anybody find stuff like that? I am at my computer 12-16 hours a day, and HALF of that is on the 'net, and I have never even THOUGHT of looking for something like that... :)
Simply cause you are not as cool as me! kirkcashalini wrote:
WOW, pretty awesome site. Are there any websites like this for sub disections? Obviously more pricy to get everyone to chop their subs in half. But even a bunch of manufacturers cut away pictures or anything.
realmofexcursion .com has some woofer vids, but no dissection pics. |
-------------
Posted By: samrock
Date Posted: February 05, 2006 at 12:52 AM
i got it lol.. i thaught u forgot to put the url to the site.. then i noticed the link was the text.. thanks a mill bro.. the 97.3 is an exact copy of the 2100... now its just to trouble find documation for repair.. you would not happen to know of a site like that i can get schematics from LOL.. orion said to use www.theampdoctor.com but they owner i guess steave does not pick up the phone sence wed. IMO he must have more than he can repair ------------- OF ALL THE THINGS I HAVE LOST I MISS MY MIND THE MOST!
Posted By: blackmica3
Date Posted: February 05, 2006 at 4:10 PM
Posted By: samrock
Date Posted: February 05, 2006 at 5:55 PM
what amp u got there blackmica3
-------------
OF ALL THE THINGS I HAVE LOST I MISS MY MIND THE MOST!
Posted By: fingaz22
Date Posted: February 05, 2006 at 7:23 PM
is that the 2500d from orion?
-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs
Posted By: samrock
Date Posted: February 05, 2006 at 7:57 PM
I just thaught yall should see this.. it was my old 87 dodge d50.. dont let the smoke and mirrors fool you it is 12 15inch orion SVCs on 2 orion 2100s, 3 orion 275s on 10 MB Quarts sam
------------- OF ALL THE THINGS I HAVE LOST I MISS MY MIND THE MOST!
Posted By: fingaz22
Date Posted: February 05, 2006 at 9:08 PM
nice samrock. i like it. what kind of power stage did you have to keep that setup fead with power? how many amp altenator? what gauge wire, etc..etc...
-------------
JUST ONE MORE AMP!!!
hu,alpine cva 1005/dva 5205
sound processor,symmetry(first one).
sub amp,power 1000 the terminator.(1992).
subs,spl comp dual 1 ohms.
punch 150hd on a 10" ev.
alotofhighs
Posted By: blackmica3
Date Posted: February 05, 2006 at 9:40 PM
samrock wrote:
what amp u got there blackmica3
In the pic is an Orion 2500d, I run a Phoenix Gold 500.1. But I will be changing to a Memphis MCD1000 
Posted By: samrock
Date Posted: February 05, 2006 at 10:19 PM
well the power was made from 2 stingers one was connected to the bat the factory location and put out 160A this ran the head unit and factory stuff and had a charge reg on it with one 0ga running to the back connected to 2 900cca bats to drive the 3 275s.. then the no2 stinger was dual 180 output this ran to the rear of the truck through the frame rails to the batts in the back they sat just under the 2100s there was 10 batts total 4 for each 2100 and 2 for the 3 275s. we took it to db drag and only got 163.1 with it skimming by just .1 behind 3rd place for the year, the record that year was 170.9 in 98.. the first time we did this we only put 6 15s and we could not get over 155 db with 6xtrs and 1 2100... i miss this truck it hurt to sit inside with it turned up.. i am hopping to get about the same dbs with 3 10 inch DD 3500s and 3 concept 97.3s i saw a sentra the other day with 2 DD2500s and 1 hcca2500d pushing 140.. it was a crappy install box could move about in the trunk. i have also seen a civic same setup but install in the correct manor and it pushed 147... if i can get 155 to 160 from 3 10s ill be happy.. it would knock the boots off any thing around here.. oo the new system will be going into my 97 hyundai sonata. i am trying to find all concept gear.. i have one 97.3 now i am having problems with it tho.. the second is on the way.. i have my eyes on the third.. but the guy does not want to come off it.. before long i i will get him out of it.. if i have to buy him a 2100 and pay him for his amp too i will get the third amp. i have compaird the 2100 to the 97.3 and they are twins down to each part.. the only thing i cant tell is if the mosfets are the same the 97.3 looks like gen 2 of the hcca 2100 tho.. they should be 2 ohm across the bridge if they are gen 2.. if they are gen 1, i know they will take a .66 ohm load.. any way i have done what i can to my amp and it will be shipped to the repair shop when i go offshore this week hopefully when i come home this one will be back and my 2nd one will be in btw if any one need amps repaired orion tells you to go to www.theampdoctor.com this guy has not returned my calls or emails for a week. but i have had good luck with www.justrepairs.com they dont want to tell me the stats to load test this amp too.. but its ok.. they are scared to lose the job. loard knows if i had the schmetics i would fix this stuff my self LOL ------------- OF ALL THE THINGS I HAVE LOST I MISS MY MIND THE MOST!
Posted By: samrock
Date Posted: February 05, 2006 at 11:49 PM
if you are a MECP do they consider you a installer.?? i have not installed in long time but i am a MECP installer PRO STOCK This division uses the Super Stock rules with the following exceptions. A USACI competitor must compete in the Pro Stock division if he or she meets one or more of the following conditions: He or she works for a car audio dealer, manufacturer or distributor, or receives financial compensation for using a specific manufacturer’s equipment, or a competitor’s immediate family member meets one or both of the previous conditions or a competitor who does not meet any of the previous conditions may compete in Pro Stock by choice. Voltage in Pro Stock may not exceed 18 volts. ------------- OF ALL THE THINGS I HAVE LOST I MISS MY MIND THE MOST!
Posted By: Big Dog
Date Posted: April 11, 2006 at 1:46 PM
www.theampdoctor.com is a dead link ------------- Prepare your future. It wasn't the lack of stones that killed the stone age.
Posted By: jeffchilcott
Date Posted: April 11, 2006 at 4:20 PM
If you are MECP cert, then you are not considered Pro-Stock by USACI...But if you work in a shop or gain profit from doing such installs then YES you are Pro-stock.
Then you can come play with me, 0-1000 Pro.
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: samrock
Date Posted: April 16, 2006 at 8:01 PM
i am sorry it is www.ampdoctor.com thats kool about the prostock then i am no longer working as a installer.. i just do installs on the side every now and then for friends. ------------- OF ALL THE THINGS I HAVE LOST I MISS MY MIND THE MOST!
|
