Print Page | Close Window

Wiring 2HE2’s and Eclipse 34230

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72196
Printed Date: May 29, 2024 at 2:31 AM


Topic: Wiring 2HE2’s and Eclipse 34230

Posted By: gunthagunth
Subject: Wiring 2HE2’s and Eclipse 34230
Date Posted: February 04, 2006 at 8:03 PM

I just purchased a set of 2 12" Fosgate HE2 subs.  they are 4 ohm subs.  I also purchased a Eclipse 34230 amp to power them.  i was wondering if anyone is familiar with this setup and if anyone has any tips on how they would wire this to get the best bass.  i dunno if i want the settings at L and R, Mono, or Stereo.  also if anyone would know the best way to wire the back of the subs so i can use the dual voice coils and not blow the amp.  I dont know much about amps and subs and i definetly dont want blown subs or fried channels on the amp.  any info on this would be great thanks.   ~Jason



Replies:

Posted By: gunthagunth
Date Posted: February 06, 2006 at 5:26 PM

btt


Print Page | Close Window