components with a directed 6500

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72223
Printed Date: July 06, 2025 at 11:35 PM

Topic: components with a directed 6500

Posted By: derrickg
Subject: components with a directed 6500
Date Posted: February 05, 2006 at 9:41 AM

i wanted to know if there are some component sets that can handle 300 watts rms a set i am going to bridge 2 channels together and use the other 2 for rear fill speakers.

Replies:

Posted By: geepherder
Date Posted: February 05, 2006 at 7:18 PM

I can't think of any, but why would you bridge an amp to run component speakers? You'd lose your stereo seperation- both speakers would play exactly the same thing.

-------------
My ex once told me I have a perfect face for radio.

Posted By: Ravendarat
Date Posted: February 06, 2006 at 3:16 AM

Not if you use a 4 channel amp, I have been doing it for over a year now. If your not then that is indeed a stupid thing to do. Check into some 3 way sets, they are the only things I can think of that are gonna handle that kinda power, however doing what you are planning on and then using speakers that have a lower power handling and then just backing the gain down is gonna give you plenty of head room which is always a good thing.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer