Running Power Cable, 2000 Eclipse

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72423
Printed Date: June 30, 2025 at 4:32 AM

Topic: Running Power Cable, 2000 Eclipse

Posted By: edoughty
Subject: Running Power Cable, 2000 Eclipse
Date Posted: February 08, 2006 at 10:54 AM

Hey, im in the middle of an install at work on a 2000 eclipse and need a little help. just wondering where the best place to run the power cable through the firewall is at on these cars. im tryin not to have to drill a new hole. can anybody help me out in a pinch. thanks in advance-Eric

Replies:

Posted By: mobile1
Date Posted: February 08, 2006 at 4:06 PM

if you don't want to drill a hole, you'll have to find a gromet that has enough room to run your cable through. if its 4 ga. or bigger, i doubt you'll find one.

Posted By: warpedimage3
Date Posted: February 08, 2006 at 5:11 PM

if the car is an automatic, then you can drill through the clutch plate where the clutch would have been there is nothing blocking it on either side.

Print Page | Close Window