jeep audio system

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72431
Printed Date: May 12, 2024 at 3:16 PM

Topic: jeep audio system

Posted By: taiebbenabbass
Subject: jeep audio system
Date Posted: February 08, 2006 at 12:41 PM

hello! there could anyone possibly help, i just bought a jeep and i'm not able to operate the audio system i know it require a code but the only message on the LCD screen is wait, and i've been waiting but nothing happening.

many thanks.

Replies:

Posted By: coppellstereo
Date Posted: February 08, 2006 at 5:14 PM

what is this 'code'?

-------------

Posted By: r_wern
Date Posted: February 09, 2006 at 12:03 AM

was the jeep used? if so, somebody probably had an aftermarket system in it before. some factory headunits have a "theft lock" system on them, meaning they will no longer work after they have been unplugged from the car. normally, you have to remove the radio and call the local jeep dealership to give them the serial number printed on the radio. they will then give you a code to punch into the factory radio to make it work again.

Posted By: taiebbenabbass
Date Posted: February 09, 2006 at 1:19 AM

the code is 3624

Print Page | Close Window